Microsens RS485 Manuel d'utilisateur télécharger pdf (Page 39)

MICROSENS User Manual Device Server RS-232/422/485 Port to 1x or 2x 10/100TX

and Device Server RS-232/422/485 Port to 1x 100FX

Technical Specification

This section provides the specifications of device server.

Protocol

ICMP, IP, TCP, UDP, DHCP, BOOTP, ARP/RARP, Telnet,

RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP

LED Indicators

PWR 1 / READY:

1) Red On: Power is on and booting up. Red Blinking:

Indicates an IP conflict, or DHCP or BOOTP server did

not respond properly.

2) Green On: Power is on and functioning normally.

Green Blinking: Located by Administrator’s Location

function.

PWR 2 / READY:

1) Red On: Power is on and booting up. Red Blinking:

Indicates an IP conflict, or DHCP or BOOTP server did

not respond properly.

2) Green On: Power is on and functioning normally.

Green Blinking: Located by Administrator’s Location

function.

Eth1 Link / ACT, Eth2 Link / ACT

(1 RS-232/422/485 port to 2 10/100TX Device Server):

Orange Blinking: 10 Mbps Ethernet

Green Blinking: 100 Mbps Ethernet

Eth Link / ACT, Eth2 Link / ACT

(1 RS-232/422/485 port to 1 10/100TX Device Server):

Orange Blinking: 10 Mbps Ethernet

Green Blinking: 100 Mbps Ethernet

Fiber Link / ACT

(1 RS-232/422/485 port to 1 100FX Device Server):

Green Blinking: 100 Mbps fiber connection

TX / RX

(1 RS-232/422/485 port to 1 100FX Device Server):

Serial port is receiving data (Orange)

Serial port is transmitting data (Green).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Microsens RS485 Manuel d'utilisateur Page 39