Microsens RS232 Spécifications télécharger pdf (Page 14)

19'' 6U Chassis page 14/71

The rescue CLI allows the user to perform all the upgrade procedure described in the

CLI documentation.

Use the following procedure to start the rescue CLI on the MGNT management board:

Procedure

• Use a needle-like tool (i.e. paper clip) to reach the MGNT reset button and

press during 5 seconds minimum to activate the rescue CLI feature

• Observe behaviour of MGNT LEDs. The colour sequence of the SW LED on the

front panel of the MGNT is: Green > Off > Orange > Green

• The rescue CLI is then available through the RS232 port

• Use the login “administrator” and the password “administrator” to log in

the rescue CLI

• The prompt “rescue_cli>” appears to indicate that the rescue CLI is currently

running

• You can perform all the required upgrade or change the configuration of the

MGNT management board

• Perform a reset of the MGNT management board to quit the rescue CLI

End procedure

Figure 12: MGNT Management board reset button

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 70 71

Pas de commentaire

Microsens RS232 Spécifications Page 14