Microsens RS232 Spécifications télécharger pdf (Page 24)

4 Port Industrial Device Server Manual page 24/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

IP Configuration

You must assign a valid IP address for Device Server before attached in your

network environment. Your network administrator should provide you with the IP

address and related settings.

The IP address must be unique and within the network (otherwise, Device Server

will not have a valid connection to the network). You can choose from three

possible “IP configuration” modes: Static, DHCP/BOOTP. The Factory Default IP

address is “192.168.16.1”

The following table describes the labels in this screen.

Label

Description

DHCP/BOOTP

Obtain the IP address automatically from DHCP server.

Static IP

Address

Assigning an IP address manually.

Subnet Mask

Set the subnet mask to communicate on the network.

Gateway

Enter the IP address of the router in you network.

DNS Server

Enter the IP address of the DNS server to translate domain names into IP

address.

Auto IP Report

The device server will report its status periodically. At VCOM Manager>IP

collection option show the device server status. The report interval is 0

indicate disable this setting (default). But you can set the other IP or

Port.

Switch Mode

Redundant:

When the connection between master-link and LAN fails, the DS can

automatically switch to another LAN port within10mS, and still

guarantees a non-stop connection

Switch:

Daisy Chain support to reduce usage of switch ports.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Pas de commentaire

Microsens RS232 Spécifications Page 24