Microsens RS232 Spécifications télécharger pdf (Page 26)

4 Port Industrial Device Server Manual page 26/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

The following table describes the labels in this screen.

Label

Description

Port Alias

Remark the port to hint the connected device.

Interface

RS232 / RS422 / RS485(2-wires) / RS485(4-wires)

Baud rate

110bps/300bps/1200bps/2400bps/4800bps/9600bps/19200bps/

38400bps/57600bps/115200bps/230400bps/460800bps

Data Bits

5, 6, 7, 8

Stop Bits

1, 2 (1.5)

Parity

No, Even, Odd, Mark, Space

Flow Control

No, XON/XOFF, RTS/CTS, DTR/DSR

Force TX Interval

Time

Force TX interval time is to specify the timeout when no data has been

transmitted. When the timeout is reached or TX buffer is full (4K

Bytes), the queued data will be sent. 0 means disable. Factory default

value is 0.

Performance

Throughput: This mode optimized for highest transmission speed.

Latency: This mode optimized for shortest response time.

Apply

Activate settings on this page.

Port Profile

The following table describes the labels in this screen.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Pas de commentaire

Microsens RS232 Spécifications Page 26